FREE DELIVERY ONLINE ONLY (Subject to T & C's)

Skip to the beginning of the images gallery

In Stock

Black Anodised Aluminium 30mm Wheel Spacers - Qty 4

Solid billet Black anodised aluminium, with 6 studs & nuts per spacer See more detail

Choose your vehicle to ensure compatibility

Choose Vehicle

Rating:

100 % of 100

27 Reviews Add Your Review

£117.60 £98.00

Add to Wishlist

Product Code:

ACWH02

Order before 15:00 GMT weekdays for same day dispatch.

Order by 15:00 mon-fri for same day dispatch.

28 Day returns or exchange.

1 Year Parts Warranty

Details

Set of four, Black 30mm wide solid billet aluminium wheel spacers. Machined from one piece of solid billet aluminium. Each spacer is fitted with 6 high tensile studs that your original wheel will bolt to using your original wheel nuts, and 6 new nuts to bolt the spacer to the hub as pictured in the product images. This effectively extending the hub by 30mm - PCD: 6 x 139.7.

Fitting:

Never use Air guns when fitting spacers to hub or wheel to spacer.
Always ensure wheels and spacers are torqued to original vehicle wheel specification
Always check that you have sufficient threads holding the spacer to the hub and that the stud is protruding through the nut - if in doubt use the extended stud option as per images.
As with any component, once fitted always ensure all components are torqued correctly and that every part is secure.
As when fitting any wheel always check torques after a few miles
Not Hub-Centic design - The 6 tapered nuts provided with the spacers centralise the spacer.

Wheel spacers are usually fitted on 4x4's to increase the vehicle track width which is ideal to stabilise lifted vehicles as well as to ensure aftermarket or alternative alloy wheels fit correctly without fouling any suspension, steering, hub or braking components.

What to check:

Does your vehicle need extended front studs? - Please see note below
Does your vehicle have clearance on the bodywork when on full lock? - Please see note below

As a tip, prior to ordering pull your wheel away from your hub by 30mm to mimic a spacer and turn from lock to lock to ensure you have sufficient clearance to bodywork.

Extended Front Wheel Stud Information;

As many people are aware, certain models have a very short original front wheel stud, this is mainly due to the fact that Toyota use a wheel nut with a shank fitting allowing the nut to recede into the wheel giving a good purchase.

Wheel spacers use a taper nut system to bolt the spacer to the hub, this means that on certain models the stud does not protrude all the way through the nut which isn't ideal in our opinion.

With safety in mind, we have therefore taken the decision to supply the option of the spacers with 12 new extended front wheel studs which should be fitted to the hub prior to fitting the spacer, if you require the extended stud kit simply tick the box option above the orange "add to basket" button.

The new extended studs we supply are of universal length, 62mm long including the spline, 67mm overall and made of High-Grade 30MnB3 high tensile steel, 10.9 in tensile strength, thread size 12mm x 1.5mm as per standard. The extended studs will require cutting to length for the specific vehicle the spacers are being fitted to.

Due to short supply we can ONLY supply studs to those customers that have purchased spacers from RoughTrax.

If you fit the spacer first and measure the extra length you will require you can then cut the studs to your required length prior to fitting.

Remember, always a good idea to cut one and fit first to make sure you have measured correctly!

The vehicles we are aware of that will/might (depending on wheel type) require extended wheel studs are;

Hilux Pickups from 2005-ON (Mk6, Mk7 & Mk8)
Hilux Surfs from 1996-2003 (KZN185, RZN185 & VZN185)
Land Cruiser 90 series, 120 series, 150 series

(but always check with any model that upon fitting that you have sufficient stud protruding through the nuts - we can always supply extra studs after if required)

SPECS / Fitments

More Information
Weight	6.060000
Dimensions	30mm
Manufacturer	Soong
MPN (Manufacturer Part Number)	WS-6-139-1
Warranty Options	1 Year Parts Warranty
Fitting Position	Hub
Unit of Sale	Set of four (two pairs)
Specs & Fitment	PCD: 6 x 139.7 Thread: 12mm x 1.5mm Spacer Stud Length: 32mm Inner Diameter: 108mm Outer Diameter: 176mm Width: 30mm Quantity: 4 Extended Front Wheel Stud Dimensions; (You will need to cut the stud to the required length)

Compatible Vehicles

Vehicle Compatibility

Below are a list of compatible vehicle for this product.

SERVICE KITS for your Toyota

You have not selected a Toyota model to filter these products yet.

Choose your vehicle to ensure compatibility

Change Vehicle

Delivery and Returns

Delivery Information - Cut-off Time 15:00 Monday-Friday

> Click here for our Opening Hours and Delivery Times

Free Delivery - Orders Over £90 (Online Orders Only / 2-5 day service) subject to Terms & Conditions*

At checkout enter your delivery Postcode - the available options and charges will be provided depending on the product and location prior to any purchase.

*Excludes Islands and some Scottish postcodes where surcharges apply, click here for exclusions. Free delivery is not valid on any telephone order.

PLEASE NOTE: Orders placed before 15:00 weekdays will be dispatched on the same day subject to stock and points below. Orders placed after 15:00 on Friday or over the weekend will be dispatched on the following Monday.

If you wish to make any additions or alternations to your initial order you will need to let us know before 12.00 noon.

We are closed over Bank Holidays.

For full details please visit to our Deliveries page.

International Delivery – Cut-off 12 Noon Monday-Friday

RoughTrax offers fast, reliable, and affordable service as standard, we make sending your international order easy with an online tracking system sent straight to your email once despatched.

To confirm a delivery price simply add products to your basket, select your country and enter your postcode in the delivery field. The website will automatically calculate your delivery price. Goods can be sent worldwide.

All International orders are sent with FedEx, Parcelforce or DHL depending on the product/s & service you have selected.

For full details please visit our International Deliveries page.

Arrange Own Courier

If a delivery method is not available, an option of “Arrange My Own Courier” will display. This enables you to order through the website and arrange your own courier for your goods to be collected directly from RoughTrax in Bristol, UK.

For full details please visit to our Arrange My Own Courier page.

Returns

At RoughTrax we know that sometimes you will need to return items.

All products must be re-sellable and returned along with the original packaging and documents. (Stock to order or Special order items are non-returnable).
Goods must be returned within 28 days of purchase as per our Terms and Conditions
Products must be returned to RoughTrax at RoughTrax Ltd, Units 4-7 Pixash Business Centre, Pixash Lane, Keynsham, Bristol. BS31 1TP United Kingdom

If Returned parts that qualified for Free Delivery.

If you return a product(s) that qualified you for Free Delivery and the remainder of your order does not exceed the £90 Free Delivery Promotion, then RoughTrax reserve the right to charge carriage for the remaining products purchased to cover the carriage cost.

Please visit our Returns page to download a returns form and for further information.

Product Reviews

Questions

Questions & Answers for Black Anodised Aluminium 30mm Wheel Spacers - Qty 4

Q. Do I need Extended Front Studs or not?
A. The vehicles we are aware of that will/might (depending on wheel type) require extended wheel studs are;

Hilux Pickups from 2005-ON (Mk6 & Mk7's)
Hilux Surfs from 1996-2003 (KZN185, RZN185 & VZN185)
Land Cruiser 90 series, 120 series & 150 series.

(but always check with any model that upon fitting that you have sufficient stud protruding through the nuts - we can always supply extra studs after if required)

Wheel spacers use a taper nut system to bolt the spacer to the hub, this means that on certain models the stud does not protrude all the way through the nut which isn't ideal in our opinion.

With safety in mind, we have therefore taken the decision to supply the option of spacers with 12 new extended front wheel studs which should be fitted to the hub prior to fitting the spacer, if you require the extended stud kit simply tick the box option above the orange "add to basket" button.

If you fit the spacer first and measure the extra length you will require you can then cut the studs to your required length prior to fitting.

Remember, always a good idea to cut one and fit first to make sure you have measured correctly.

Q. Can I purchase studs separately?
A. We can only supply extended studs to those customers that have purchased spacers from RoughTrax - this is due to the short supply.